close

тел./факс: +7 (8452) 63-34-92 +7 (8452) 63-37-69 410044, г. Саратов, проспект Строителей, 1-Б
Продукция
Cотрудничество
ТОСС ищет сотрудничества с научно-исследовательскими экспериментальными группами для тестирования стеклоизделий, предназначенных для различных применений. Отправить заявку: Введите, то что написано в окне ниже:
Rods

Rods


Technologies, developed at our company, allow fabricating high accuracy rods with different cross section geometry from electron-tube, optical and medical purpose glass in small quantities and in maximum short time. We fabricate one and multicomponent rods with the specified structure and parameters using materials agreeing in thermophysical properties, for example, in thermal coefficient of linear expansion (TCLE) and viscosity.

We can :
— fabricate rods with any cross section geometry (ellipse, circle, hexagon, triangle and others);
— fabricate rods with the diameter linearly-varying according to a specified law (for example cone-shaped ones), rod lenses.
Rods
rod -outer diameter (OD) is 1-40 mm;
-length (L) is up to 2500* mm;
-fabrication accuracy is up to 0.5%.
* depending on OD

Glass grades used for rods fabrication are in the  table. Rods may be fabricated according to OST 11 PО.735.002-73 or according to the Customer’s requirements.