close

тел./факс: +7 (8452) 63-34-92 +7 (8452) 63-37-69 410044, г. Саратов, проспект Строителей, 1-Б
Продукция
Cотрудничество
ТОСС ищет сотрудничества с научно-исследовательскими экспериментальными группами для тестирования стеклоизделий, предназначенных для различных применений. Отправить заявку: Введите, то что написано в окне ниже:
Redrawing machine

The machine is for redrawing of items with different cross-section shapes. It can not only draw single core items but also batches of single and multi-core elements from tubes and rods with different cross section. The initial (macro) and final (micro) structures cross sections фку geometrically similar. Several cycles of glass items redrawing allow reducing the structure component dimensions up to 0.2 mcm with the accuracy of 0.5-1.0%.

Redrawing machine Tower

The glass items high accuracy is due to the use of cylindrical chambers with independent heating elements (heating zones), designated for creation of the desired temperature distribution along the whole length and angular coordinates of the cylinder and high accuracy electric motors for the fabricated glass product cross-section control. We can fabricate airtight heating chambers in order to perform in vacuum or under pressure conditions.

The constituent part of our equipment is automatic control systems including electronic control systems and personal computers.

Technical Specifications

  • drawing speed is 0.1-7.0 m/min;
  • temperature in the furnace is 400-900oC±1oC;

Preform Dimensions

  • diameter is up to 60 mm;;
  • length is up to 1200 mm.

The production process video:

  • 1. Loading stage

  • 2. Redrawing stage