close

тел./факс: +7 (8452) 63-34-92 +7 (8452) 63-37-69 410044, г. Саратов, проспект Строителей, 1-Б
Продукция
Cотрудничество
ТОСС ищет сотрудничества с научно-исследовательскими экспериментальными группами для тестирования стеклоизделий, предназначенных для различных применений. Отправить заявку: Введите, то что написано в окне ниже:
Glass and Glass Products Cutting Machines
Tube cutting machine Tube cutting machine
Tube cutting machine

Machines for tubes and rods cutting by a diamond wheel with manual material feeding to the wheel. The wheel diameter is 150mm. The wheel rotation rate is 3000 rpm.

Intermittently operating devices for tubes and rods cutting during drawing or redrawing process with the working elements fluid power drive. The cutting method is as follows: a scratch mark initiating a crack is mechanically made on the glass surface; the glass product is bent at the place of the scratch mark; it triggers the crack development and breaking of the glass product part. The cutting accuracy along the length is +-5mm. The scratch mark is made by a rotating small diameter diamond wheel. The cut tubes and rods diameters are up to 5mm. The cut tubes minimum length is 70mm. The maximum production capacity is 21 cuts per minute.